INERT & ODOUR-FREE PAINT
DEPRO MATEX VITI
PRODUCT DESCRIPTION
A paint composed using a chemically-inert acrylic binder, DEPRO®MATEX VITI can be used indoors or outdoors to seal and protect highly absorbent surfaces (such as aerated concrete). DEPRO®MATEX VITI can be applied without the need for a finishing layer. In compliance with the "Good Hygiene Practices for the Wine Industry" Guide. In compliance with practices outlined in EU Regulation n°852 of April 29th 2004 on the hygiene of foodstuffs.
Research and Development / Scientific InputVECT’OEUR Laboratory- Certificate of Analysis N°CA11040497/2Analysis of HALOANISOLES, HALOPHENOLS and ORGANOHALOGENIC active ingredients.
USES
Recommended for use in sensitive areas and all premises were hygiene is a priority: cellar walls, winemaking premises, barrel storehouses, wine ageing and bottling premises. Recommended for use in conforming to HACCP* practices.
A paint composed using a chemically-inert acrylic binder, DEPRO®MATEX VITI can be used indoors or outdoors to seal and protect highly absorbent surfaces (such as aerated concrete). DEPRO®MATEX VITI can be applied without the need for a finishing layer. In compliance with the "Good Hygiene Practices for the Wine Industry" Guide. In compliance with practices outlined in EU Regulation n°852 of April 29th 2004 on the hygiene of foodstuffs.
Research and Development / Scientific InputVECT’OEUR Laboratory- Certificate of Analysis N°CA11040497/2Analysis of HALOANISOLES, HALOPHENOLS and ORGANOHALOGENIC active ingredients.
USES
Recommended for use in sensitive areas and all premises were hygiene is a priority: cellar walls, winemaking premises, barrel storehouses, wine ageing and bottling premises. Recommended for use in conforming to HACCP* practices.
ADVANTAGES
- Plasticized mat finish makes it easy to clean away dirt and grime commonly found in cellars.
- This odour-free surface covering may be applied in highly sensitive areas in which harmful odours might interfere with a product's organoleptic properties.
- DEPRO®MATEX VITI is a microporous product allowing surfaces to maintain their transference properties.
- Highly resistant to humid conditions easily cleaned.
- Soft paint, easy to apply and quick-drying.
Indoor/Outdoor application on: cement, concrete, chipboard, plaster, wood, brick and old paint layers.
Work surface preparation: the surface should be clean, dry, in good condition and free from any substance that may prevent the product from adhering to it. Surfaces and their preparation should conform to DTU regulation 59.1, standards NFP 7420 1 and 2
Application temperature : Min. surface temp. 7°C - Max surface temp. 30°C. Mono-component product, easily applied in 1 or 2 coats. 1st coat at 5% dilution.
Application tools: Brush, roller, airless or pneumatic paint gun Dilutant: water.
Drying at 20°C (and 65% RH): Dust-dry in 25mn. Touch dry in 1 hour. Ready for re-coating after 6 hours.
- Colors
- Blanc - Teintes RAL
- Aspect
- Mat
- Yield
- 4 à 7 m²/kg
- Dilution
- Water
- Density at 20 ° C
- 1,58
- Packaging
- 5 et 25 kg
- Preservation
- 12 months in unopened original packaging, free from frost and heat
- Séchage
- 25 min
- Recouvrable
- 6 h
- Sec
- 1 h
No reviews
Customers who bought this product also bought:
Equipments protection
WATER-BASED RUST TRANSFORMER
Protective resins inside tanks
EPOXY SURFACE COVERING
Customers who bought this product also bought:
Equipments protection
WATER-BASED RUST TRANSFORMER
Protective resins inside tanks
EPOXY SURFACE COVERING
Tap to zoom
