FILLER PUTTY FOR FILLING TANKS
SCAR MASTIC VITI
Filler putty for filling tanks
Packaging: 200 g kit (85 g BASIC part + 15 g HARDENER part + 100 g SANDED LOAD part).
PRODUCT DESCRIPTION
USE
ADVANTAGES
INSTRUCTIONS FOR USE
3 components: epoxy resin + hardener + fillers.
Contributes to the control of the risks of organoleptic contamination of stored liquids.
USE
Renovation, professional putty designed to seal, level all cracks, cavities and deformations in metal supports (oenological tanks), PVC (insulating panels), cements (tanks).
Recommended in sensitive environments, confined spaces, poorly ventilated, where olfactory contaminants are likely to create nuisances.
In the case of an application intended for food contact (inside of concrete tank), cover with
DEPRO® CHOC CONTACT VITI.Recommended in sensitive environments, confined spaces, poorly ventilated, where olfactory contaminants are likely to create nuisances.
In the case of an application intended for food contact (inside of concrete tank), cover with
ADVANTAGES
Excellent mechanical strength and fast curing (no shrinkage).
Quick and easy to install and sand.
SCAR® MASTIC VITI does not release any volatile products.
Guaranteed solvent-free. Odourless, suitable for use in food environments.
Excellent impact and abrasion resistance. Impermeable to gases and liquids.
Guaranteed solvent-free. Odourless, suitable for use in food environments.
Excellent impact and abrasion resistance. Impermeable to gases and liquids.
INSTRUCTIONS FOR USE
Substrate preparation: The substrate must be clean, sound and dry, free of any non-sticky material.
Minimum application temperature: +41℉ Relative humidity: 65 % RH.
Preparation of mixtures. Preparation of the chewing dough:
Empty the "Hardening Part" bottle into the "Base Part" metal box; mix thoroughly for 2 minutes. Never change the proportions, do not dilute.
Pour the homogeneous assembly thus obtained into the "Sandable filler kit" box and gradually incorporate all or part of the filler until the desired consistency is obtained.
Mixture life at 68.℉ : 20 min.
Positioning of SCAR® MASTIC VITI with a putty spatula.
Drying at 68 ℉: 8 h - Roughening with emery cloth paper N° 80.
Sand and finish sandpaper N° 180 + water. Dusting and drying.
Application of the finishing coating adapted to the constraints of the substrate.
Drying at 20°C: Definitive and washable hard surface: 5 days.
Cleaning of equipment: DILUANT CHOC.
Sand and finish sandpaper N° 180 + water. Dusting and drying.
Application of the finishing coating adapted to the constraints of the substrate.
Drying at 20°C: Definitive and washable hard surface: 5 days.
Cleaning of equipment: DILUANT CHOC.
- Colors
- Blanc
- Aspect
- Mat
- Packaging
- Kit 300 g
- Preservation
- 12 months in unopened original packaging, free from frost and heat
- Sec
- 8 h
- Séchage avant utilisation
- 8 jours
No reviews
Customers who bought this product also bought:
Walls and ceilings protection
INERT & ODOUR-FREE PAINT
Protective resins inside tanks
EPOXY SURFACE COVERING
Customers who bought this product also bought:
Protective resins inside tanks
EPOXY SURFACE COVERING
Equipments protection
WATER-BASED RUST TRANSFORMER
Walls and ceilings protection
INERT & ODOUR-FREE PAINT
Tap to zoom
