IMPERMEABLE DECORATIVE WOOD STAIN
DEPRO LAZUREX GEL VITI
Will not release toxic or corrosive chlorine fumes Free from pentachlorophenol Leaves wood grain visible Quick drying Odour-free Satin finish Easy to clean
PRODUCT DESCRIPTION
New generation high-protection wood stain with high binder content: 50% (fine acrylic dispersion). Ensures effective protection against the elements for all wooden structures.
Interior and exterior protection. Water-repellent to ISO 2812-3 Standard.
In aqueous phase, DEPRO®LAZUREX VITI contributes actively to environmental protection and avoidance of occupational hazards, ensuring the user's safety and wellbeing.No harmful or contaminant odours. No chlorine emissions.
In compliance with HACCP* practices. In compliance with the "Good Hygiene Practices for the Wine Industry" Guide. In compliance with practices outlined in EU Regulation n°852 of April 29th 2004 on the hygiene of foodstuffs.
Research and Development / Scientific Input
VECT’OEUR Laboratory- Certificate of Analysis N°CA10030335/6.
Analysis of HALOANISOLES, HALOPHENOLS and ORGANOHALOGENIC active ingredients.
USES
DEPRO®LAZUREX VITI is recommended for the protection of all woodwork, old and new (in winemaking premises, bottling areas, barrel storage areas)
Wooden frameworks, beams, tie-beams, joists, panelling, wall panels, stairways, wall casings, door frames, shutters, doors, windows, cladding and timbering.
ADVANTAGES
- Will not release toxic or corrosive chlorine fumes
- Free from pentachlorophenol
- Leaves wood grain visible
- Quick drying Odour-free Satin finish
- Easy to clean
INSTRUCTIONS FOR USE
DEPRO®LAZUREX VITI should be applied to wood that is dry, clean and free from loose particles.
Application temperature: 12°C-25°C
DEPRO®LAZUREX VITI is ready to use when the liquid has a semi-gelified appearance.
Stir well before and during use. Apply using a paintbrush or roller.
2 coats for indoor surfaces, 3 coats for outdoor surfaces.
Wash utensils using water.
- Colors
- Incolore, chêne clair, chêne moyen, chêne foncé, noyer, merisier, pin d’orégon
- Aspect
- Satiné
- Extrait Sec en Poids
- 50 %
- Dilution
- Water
- Density at 20 ° C
- 1
- Packaging
- 5 et 15 L
- Preservation
- 12 months in unopened original packaging, free from frost and heat
- Séchage
- 30 min
- Recouvrable
- 3 h
- Sec
- 6 h
- Dur définitif à 20 °C
- 12 h
No reviews