WATER-BASED ANTI-CORROSION PAINT
DEPRO CORROLAC VITI
Decorative anticorrosive aqueous phase lacquer
Anti-corrosion paint with a glossy finish, intended for the protection and decoration of metal surfaces in sensitive environments.
No olfactory contaminants.
Teinte RAL - RAL colour - Other colours please contact us Anti-corrosion paint with a glossy finish, intended for the protection and decoration of metal surfaces in sensitive environments.
No olfactory contaminants.
PRODUCT DESCRIPTION
DEPRO®CORROLAC VITI is an anti-corrosion paint based on Polyurethane resin in aqueous phase, intended for the protection and decoration of metal structures in sensitive environments.
Contributes to the control of the risks of organoleptic contamination of stored liquids.
Contributes to the control of the risks of organoleptic contamination of stored liquids.
USES
Reinforced protection for metal structures exposed to corrosion.
Direct adhesion to new or already coated metals (except bi-component).
Recommended in sensitive environments, confined spaces, poorly ventilated, where olfactory contaminants are likely to create nuisances.
Special cooperage: Protection and decoration of the strapping.
Direct adhesion to new or already coated metals (except bi-component).
Recommended in sensitive environments, confined spaces, poorly ventilated, where olfactory contaminants are likely to create nuisances.
Special cooperage: Protection and decoration of the strapping.
ADVANTAGES
Long-lasting rust protection. Excellent adhesion to new or coated ferrous metals.
Very good UV and weather resistance. Easy to apply, one-component, does not leak.
Microporous, allows the media to retain their transfer characteristics.
Very good UV and weather resistance. Easy to apply, one-component, does not leak.
Microporous, allows the media to retain their transfer characteristics.
INSTRUCTIONS FOR USE
The substrates, preparation work and application conditions must comply with the Standards and DTU in force.
The climatic conditions of application must comply with the NF P74-2011 Standard.
In outdoor work, the temperature must not be lower than +5 °C and the humidity must not exceed 80% relative humidity.
In indoor work, the application temperature must not be lower than +8 °C and the humidity must not exceed 65% relative humidity.
The climatic conditions of application must comply with the NF P74-2011 Standard.
In outdoor work, the temperature must not be lower than +5 °C and the humidity must not exceed 80% relative humidity.
In indoor work, the application temperature must not be lower than +8 °C and the humidity must not exceed 65% relative humidity.
DEPRO® CORROLAC VITI must be applied on a surface in good condition, dry, non-condensing, perfectly degreased or stripped and free of non-adherent materials.
Application equipment: brush, roller or spray gun. Substrate temperature: +5 °C - Max. temperature: +35 °C
Pneumatic gun: Dilution 3 to 5% - Dilution: water.
Application in 2 or 3 coats depending on the environment and the nature of the work.
Interior: 2 coats - Exterior: 2 coats on rustproof primer - 3 coats on raw metal.
Drying = Dust-free: 30 min - Touch dry: 45 min - Hard, recoatable: 12 hours.
Application equipment: brush, roller or spray gun. Substrate temperature: +5 °C - Max. temperature: +35 °C
Pneumatic gun: Dilution 3 to 5% - Dilution: water.
Application in 2 or 3 coats depending on the environment and the nature of the work.
Interior: 2 coats - Exterior: 2 coats on rustproof primer - 3 coats on raw metal.
Drying = Dust-free: 30 min - Touch dry: 45 min - Hard, recoatable: 12 hours.
- Colors
- Blanc - Teintes RAL
- Aspect
- Brillant
- Extrait Sec en Poids
- 52 %
- Yield
- 7 à 9 m²/kg
- Dilution
- Water
- Density at 20 ° C
- 1,27
- Packaging
- 5 et 20 kg
- Preservation
- 12 months in unopened original packaging, free from frost and heat
- Séchage
- 30 min
- Recouvrable
- 12 h
- Sec
- 45 min
- Dur définitif à 20 °C
- 12 h
No reviews