ANTIFOULING PAINT DESIGNED FOR CELLARS

PRODUCT DESCRIPTION: antifouling paint for wine cellars and tanks

Paint with anti-fouling properties, enhanced using an anti-adherent agent (PTFE*).

Complies with practices outlined in EU Regulation n°852 of April 29th 2004 on the hygiene foodstuffs. Recommended for use in the treatments of humid, poorly-lit areas.

Helps control common biological fouling in storehouses: encrustation, moulds, and fungi.

Confirmation of absence of contamination in liquid products: VECT’OEUR Laboratory.

VECT’OEUR Laboratory- Certificate of Analysis N°C10030335: Analyses for HALOANISOLES, HALOPHENOLS and ORGANOHALOGENIC active ingredients.

Evaluation of risk of indirect wine contamination: VECT’OEUR Laboratory. Report N°CE 14081180

In compliance with the "Good Hygiene Practices for the Wine Industry" Guide." In compliance with HACCP* practices. Cellars, barrel storehouses and all premises requiring optimum sanitary conditions.

ADVANTAGES: antifouling paint for wine cellars and tanks

The presence of anti-adherent agents combined with alkyd-urethane resins means that surfaces having been treated with this product can be quickly and easily cleaned and disinfected.

• Recommended for us in humid areas or outdoor environments.
• Impervious to fouling: organic soiling, greasy residue and fingerprints.
• Non-adherent: Allows for fast cleaning and decontamination. Leaves only a temporary odour.
• UV resistant, non-yellowing, washable (Inc. using detergents) - Easy to maintain
• Excellent resistance to humid abrasion.
• Economic due to high yield and long lasting effects.
• Fire resistance: M1 rating.

INSTRUCTION FOR USE: antifouling paint for wine cellars and tanks

When using product in cellars, winery containers must be hermetically sealed. Winemaking activity can resume six days after product application.

This product is mono-component and ready-to-use, requiring 2 or 3 coats (shake before use): using a brush or lacquer roller: 1st coat: 5% dilution. 2nd and 3rd coats: neat.

Using a spray gun: 5 - 10% dilution using DILUANT SALISTOP VITI.

Drying: Touch dry: 6 hours - Ready for re-coating: 12-24 hours.

Application: product may be applied to most types of surfaces (including cement, primer, aerated concrete, wood, ceramic, PVC, metal), whether untreated or already painted. Indoors or outdoors, on walls, plinths, doors, ceilings and facades. Compatible with most existing coverings (just ask us).

Application surface preparation: the surface should be clean, dry, in good condition and free from any substance that may prevent the product from adhering to it.  Surfaces and their preparation should conform to DTU regulation 59.1. In cases where the surface has already been painted, a trial attempt is recommended.

Specific conditions after surface preparation: On new cement or lime plaster, apply DEPRO AQUAFIX VITI as a primer coat. On metal, use a specialised primer: DEPRO AQUAPRIM VITI.

Easy to maintain: clean the finished surface normally as soon as dirt or other marks appear.

Please Note: Rinse the surface with clean water immediately after applying any solution containing acid, peracetic acid, hydrogen peroxide or caustic soda.