DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI
DEPRO SATIN COV 0+ VITI

INERT PEINT COV 0+

DEPRO SATIN COV 0+ VITI

  • Odour free, this surface covering may be applied in highly sensitive areas where contaminant odours could lead to analytical or organoleptic modifications (barrel storehouses, winemaking premises, etc.).
  • Excellent resistance in humid conditions.
  • Soft paint, easy to apply and quick-drying.
Type
Couleur
  • Blanc
 

PRODUCT DESCRIPTION
The 1st microporous surface covering rated VOC 0+ (1), designed for the protection of storehouse walls. 
Helps control and prevent common biological fouling in storehouses: grime, moulds and fungi.
High performance coating, stands up to mechanical pressure (such as humid abrasion from washing) and chemical contact (solutions used in the winemaking process, alkaline agents, etc.).
Contains an inert acrylic binder and active anti-fouling active formula . Pentachlorophenol-free guarantee.
In compliance with HACCP* practices.
Complies with the "Good Hygiene Practices Guide for the Wine Industry". In compliance with practices outlined in EU Regulation n°852 of April 29th 2004 on the hygiene of foodstuffs.
Research and Development / Scientific Input
VECT’OEUR Laboratory N°CA11040497.
1/ Screening and quantity analysis: Haloanisoles and Halophenols
2/ Screening and quantity analysis: Organohalogenic active ingredients and synthetic pyrethoids.
3/ Screening and quantity analysis: volatile aromatic hydrocarbons.
3/ Screening and quantity analysis: polycyclic aromatic hydrocarbons (PAH).
5/ Screening and quantity analysis: metals (in accordance with RSDE rules).
6/ Screening and quantity analysis: flouranthene (in accordance with RSDE requirements).
7/ Screening and quantity analysis: nonylphenol (in accordance with RSDE requirements).

USES
Recommended for use in sensitive areas and all premises where hygiene is a priority: storehouse walls, winemaking premises, wine ageing and bottling premises.

ADVANTAGES
  • The absence of any quantifiable rejection of solvents or co-solvents allows the product to contribute effectively to preserving the quality of the winemaking environment.
  • Plasticised satin finish enables easy cleaning of fouling caused by moisture.
  • Odour free, this surface covering may be applied in highly sensitive areas where contaminant odours could lead to analytical or organoleptic modifications (barrel storehouses, winemaking premises, etc.).
  • DEPRO®SATIN COV 0+ is a microporous product allowing surfaces to maintain their transfer properties.
  • Excellent resistance in humid conditions.
  • Soft paint, easy to apply and quick-drying.

INSTRUCTIONS FOR USE
Areas of use: Walls, facades, ceilings, frames, plinths.
Indoor/Otdoor application on: cement, concrete, chipboard, plaster, wood, brick and old paint layers. May be appliued to highly absorbent surfaces through combined usage with DEPRO®AQUAFIX VITI.
Work surface preparation: the surface should be clean, dry, in good condition and free from any substance that may prevent the product from adhering to it.
Application temperature: Min. surface temp. 7°C - Max surface temp. 30°C. DEPRO®SATIN COV 0+ is a mono-component product, easily applied in 1 or 2 coats, 1st coat diluted with 5% water.
Application tools: Brush, roller, airless or pneumatic paint gun Diluent: water
Drying at 20°C (and 65% RH): Dust-dry in 20mn. Touch dry in 30mn. Ready for re-coating after 4-6 hours.  Easy to maintain: clean the finished surface normally as soon as dirt or other marks appear.
Please note: Rinse the surface with clean water immediately after applying any solution containing peracetic acid, hydrogen peroxide or lye-based solutions.
Colors
Blanc
Aspect
Satiné
Extrait Sec en Poids
63 %
Yield
Jusqu’à 11 m²/L
Dilution
Water
Density at 20 ° C
1,4
Packaging
5 et 15 l
Preservation
12 months in unopened original packaging, free from frost and heat
Séchage
20 min
Recouvrable
4 à 6 h
Sec
30 min
No reviews